Description

Buy Shure SM87A Microphone w/ UR2 Handheld Transmitter online in India – India’s music equipment superstore.

Shure SM87A Microphone w/ UR2 Handheld Transmitter.

The SM87A with the UR2 transmitter features the SM87A supercardioid condenser vocal microphone head which is tailored for a smooth, warm accurate sound.

The flagshig UR2 Wireless Handheld Transmitter offers the most advanced features and controls including a bit-mapped backlit LCD display, infrared automatic transmitter sync and switchable RF power. It also has frequency and power lockout cabability and can be used continuously for up to 8 hours using 2 x AA Batteries (included). The UR2 is made from an all-metal die-cast construction for maximum durability.

This transmitter requires the UR4D or UR4S receiver to complete the system.

All Shure wireless transmitter designs allow for interchangeable microphone heads

Shure SM87A Features:

Switchable RF power (10/50 mW country dependant)
Infrared transmitter sync
Bit-mapped backlit LCD
Ergonomic design
All-metal die-cast construction
Frequency and power lockout
2 “AA” batteries (included) for more than 8 hours continous use

Shure SM87A Specification:

Transmitter Type: Handheld
Dimensions: 246 mm x 51 mm
Battery, endurance: 2AA, 9.5 hours (low power) or 6 hours (high power)
Weight:: 313 g

Technical specifications:

RF Carrier Frequency Range: 470-865 MHz, depending on region

Working Range:

150 m (500 ft.), under typical conditions
500 m (1600 ft) line-of-sight, outdoors for a single system
NOTE: Actual working range depends on RF signal absorption, reflection and interference

Audio Frequency Response:

40 – 18,000 Hz,(+1 dB, –3 dB).
NOTE: Overall system frequency response depends on the microphone element
Gain Adjustment Range: –10 to +20 dB
Modulation: FM (45 kHz max. deviation), compander system with pre- and de-emphasis
RF Power Output: 10 / 50 mW
Dynamic Range: >105 dB, A-weighted
Signal Polarity: Positive pressure on microphone diaphragm produces positive voltage on XLR output pin 2 with respect to XLR pin 3 and on the tip of the 1/4-inch output jack.
System Distortion (ref. ± 45 kHz deviation, 1 kHz modulation):
Current Drain: 180 mA max. (normal RF power setting), 240 mA max. (high RF power setting)
Operating Temperature Range: –18° to +57° C (0° to +135° F)
NOTE: Battery characteristics may limit this range
NOTE: Electrical safety approval is based on a maximum ambient temperature of 35°C (95°F).
Housing: Aluminum die-cast handle and aluminum machined battery cup